--- M0 S1 ACTIVE 44000 V42BIS LAPM 1 1 NORMAL M1 ADMIN UNKNWN NONE NONE 24 1 CIRCUIT DISCONNECT---M1 doesn't seem to be accepting calls properly. Incoming calls will hang with no prompt, then get disconnected, or PAP negotiation takes along time before establishing a network connection (if it gets to that stage). I put M1 into an ADMIN state to have it bypassed for incoming calls, and the problem seems to have gone away. Is this Telco related? A bad modem? Am I just crazy? :)
I also noticed that M40 reported the same thing, which is strange, because we only have 1 incoming T1, which I assume would be M0 to M22 (though we do have 48 modems in the box).
And speaking of only have 1 incoming PRI, will the PM3 reassign a channel to an unused modem, while I have M1 in admin state? :)
Thanks, Sincerely, Warren ____ ____ ____ _ _ ____________________________________________________ | _ \| _ \ / ___| \ | | Warren Vanichuk, Systems Administrator, | |_) | |_) | | | \| | Powell River Community Network, http://www.prcn.org, | __/| _ <| |___| |\ | Powell River, British Columbia, Canada |_| |_| \_\\____|_| \_| ----------------------------------------------------
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.