(PM) pm2 config problem (fwd)

MegaZone (megazone@livingston.com)
Fri, 23 Jan 1998 17:21:18 -0800 (PST)

Once upon a time APIS shaped the electrons to say...
> o pm2e here with Solaris 2.5.1 which had Assigned Address
>192.9.200.101 for pm2e

What ComOS?

> o Changed the Assigned Address: 10.0.0.9

This isn't talking to the Internet, or is talking through a NAT box?

> o Still Using namesvc NIS
> o Default Host, Name Server, RADIUS Server, Accounting Server
> all set to 10.0.0.11

Ok.

>Q:
> o What should the Interface Address be set?

Interface Address? On what, the ether0 on the PM? Whatever you want in
the ethernet range.

> o What should the Netmask be set?

What you need it to be.

> o What should be the Broadcast Address be set?

What you have on the other units, I recommend 'high'.

> o What should the IP Gateway be set?

To the IP of your gateway/default router/

> o Routes?

What about them?

-MZ

--
Lucent Remote Access Division - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.