(PM) Routing Question.

Ed Seiler (pman@rcia.com)
Thu, 22 Jan 1998 18:28:53 -0800

I have a user with an ISDN connection to a PM3 given the IP
xxx.xxx.xxx.10 . I need to route xxx.xxx.xxx.14 and ...15 thru address
...10 to the machine at the other end. Can I just stick the following
routes in:
Network address 209.20.190.0
PM3 address is 209.20.190.2

add route xxx.xxx.xxx.14/32 xxx.xxx.xxx.10 1
add route xxx.xxx.xxx.15/32 xxx.xxx.xxx.10 1

I did a traceroute and got:

traceroute 209.20.190.14
...
bounces off every router within 1000 miles
...
209.20.130.197 my upstream provider line in to my pm3
209.20.190.3 -> My PM3 (other pm3, not the one with the T1 but
the pm3 that ...10 is connected to.
**
**
** till it just times out.

I was expecting it to at least have it go to ...10 then time out but
it didn't.

If I did a traceroute to ...10, I'd get :
209.20.130.197
209.20.190.3
209.20.190.10

as it should.

I have a PM3 and want to avoid OSPF and BGB if possible.

Thanks in advance,

Ed

RCIA <<Relatively Cheap Internet Access>>
Redmond, WA
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.