On Tue, 20 Jan 1998 clemdog@marshallnet.com wrote:
> I discovered today when I took the primary radius server down
> people on the PM3 could not go anywhere. The backup server was
> authenticating them and all but they could not get out to the world.
> If someone could point out the blunder from this it would be most
> appreciated. Hope this makes sense to someone.
>
> PM3 global config
> show global
> System Name: port1
> Default Host: 0.0.0.0
> Alternate Hosts:
> IP Gateway: 207.177.3.254
> Gateway Metric: 1
> Default Routing: Quiet (Off)
> Name Service: DNS
> Name Server: 207.177.3.2
> Domain: marshallnet.com
> Telnet Access Port: 23
> Loghost: 0.0.0.0
> Maximum PMconsole: 1
> Assigned Address: 207.177.4.129
> RADIUS Server: p100.marshallnet.com
> Alternate Server: 207.177.3.12
> Accounting Server: p100.marshallnet.com
> Alt. Acct. Server: 0.0.0.0
> PPP Authentication: PAP: on CHAP: off
> ISDN Switch Type: ATT-5ESS
> End Point Disc: None
> Disabled Modules: OSPF BGP
>
> Also
> port1> show ether0
> Ethernet Status: IP - Enabled IPX - Disabled
> Interface Addr: port1.marshallnet.com (207.177.3.253)
> Netmask: 255.255.255.0
> Broadcast Address: 207.177.3.0 < This I wonder about>
> IPX Network: 00000000
> IPX Frame Type: ETHERNET_802.2
> Ethernet Address: 00:c0:05:04:09:02
> Routing: RIP(Broadcast, Listen (On))
> Input Filter:
> Output Filter:
>
> I will try to explain the rest of this jumbo.
> We have 2 Class C's as follows
> 207.177.3.*
> 207.177.4.*
> router is at 207.177.3.254 also known as route1.marshallnet.com
> PM3 is at 207.177.3.253 also known as port1.marshallnet.com
>
> Main authentication server known as P100 aka 207.177.3.3 has
> following routes and does some dialup pots for first half of the
> 207.177.4.* network
>
> 207.177.4.128 port1.marshalln 255.255.255.128 UG0 0 5556 eth0
> 207.177.3.0 * 255.255.255.0 U 0 0 781 eth0
> 127.0.0.0 * 255.0.0.0 U 0 0 98 lo default
> route1.marshall 0.0.0.0 UG 0 0 5657 eth0
>
> Primary name server known as ns1.marshallnet.com 207.177.3.2
> has these routes
> Destination Gateway Genmask Flags Metric Ref
> 207.177.4.0 p100.marshallne 255.255.255.128 UG 00 167 eth0
> 207.177.4.128 port1.marshalln 255.255.255.128 UG 0 01089 eth0
> 207.177.3.0 * 255.255.255.0 U 0 016 eth0
> 127.0.0.0 * 255.0.0.0 U 0 0 2 lo
> default route1.marshall 0.0.0.0 UG 0 0 4358 eth0
>
> Backup Radius server kwown as P120 or 207.177.3.12
> has these
> 207.177.4.128 port1.marshalln 255.255.255.128 UG 0 0 9 eth0
> 207.177.4.0 p100.marshallne 255.255.255.128 UG 0 0 3 eth0
> 207.177.3.0 * 255.255.255.0 U 0 0 7 eth0
> 127.0.0.0 * 255.0.0.0 U 0 0 1 lo
> default route1.marshall 0.0.0.0 UG 0 0 710 eth0
>
>
> Jon Clemons
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>
>
Josh Richards - <jrichard@livingston.com>
Beta Engineer
Lucent Technologies (Remote Access Business Unit)
(previously Livingston Enterprises, Inc.)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.