Why are we looking at line1?
Doesn't the PM3 take its timing from line0? Shouldn't the singular T1 be
plugged into line 0, and shouldn't we be doing
show line0?
--John (donning fire suit)
At 9:49 -0600 1/13/98, Eric Calvert wrote:
>I'm still having problems with my PM-3 dropping customers. I'm getting
>nowhere with either Lucington or my local phone company. Each is
>pointing their finger at the other. I'm running a PM-3 with 24 56K
>modems and 1 CT1. It is running 2.7.2. Here is the output of "show
>line1":
>
>---------------------- line1 - T1 Inband DS0 ---------------
>
> Status: UP Framing: D4 Encoding: AMI PCM: u-law
>
> Signaling: Trunk E&M immediate start
>
> Receive Level: +2dB to -7.5dB
>
> Alarms Violations
> ----------------------------- -----------------------------
> Blue 0 Bipolar 17821655
> Yellow 12686 CRC Errors 3108611
> Receive Carrier Loss 0 Multiframe Sync 3996
> Loss of Sync 484
>
>Why are there so many errors? Is this normal? The system uptime is as
>follows:
>
>Livingston PortMaster PM-3 ComOS 3.7.2
>System uptime is 14 days 1 hours 47 minutes
>
>I've been watching the numbers for the past few minutes, and none of
>them are actively counting up.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.