> Ok, I have the PM3, but I would like to configure it. I have the null
> modem cable connected to my PC.. Have followed the instructions in the
> manual to a tee... Now, how do I log into it? I assume using a terminal
> emulator. But what? Is this a program I can down load, or should it be
> something that Win95 has included in it? Any Ideas would be appreciated,
> Thanx in advance...
8)
www.iav.com/~livingston/pm3.html is how I set up my First PM3...
read it and the config notes from LRABU
adjust as necessary and to your needs.
for the terminal program us ANYTHING 8) just have it set correctly.
Procomm, telix, etc... your choice...
Is this box BRAND new? Then you have to make sure EVERYTHING is set and
that you have made your notes for such before hand...
As this is your first box, what I would do is compile how you want it
setup, verify information, make sure you have everything organized and
call sales on Monday as soon as they open.... explain your situation and
they'll direct you off to a rep. who will be able to hand-hold you through
this experience.
Note: I did have a few months experience with a PM2 so the PM3 wasn't much
different.... and as noted many times if you have everything in notes you
should be able to do a setup in as little as 10 or 15 minutes... not
counting setting up DNS unless you run a script to build your DNS entries
on the fly... ;)
-- Aloha from Paradise,Sherwood
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.