Josh Richards wrote:
> On Sat, 10 Jan 1998, Gary Austin wrote:
>
> > I tried all day today with different modems. I tried Diamond
> > supraexpress 56i and Boca m56i with no luck. I looked at the messages
> > here and you mentioned something about trunkside or line side. I did a
> > show line0 and here is what was shown:
> >
>
> When you try dialing into the number that the telco gave you for this
> circuit, what happens? Do you get a modem tone? Or nothing or a fast
> busy, etc? The output you gave below helps us if we suspect that the
> circuit is not working or misconfigured (which if you dial the number for
> it and get a modem tone, it is most likely just fine).
>
> It was just was not obvious from your post whether you were having a
> problem getting the PM3 to pick up at all or just having modem handshake
> problems, that were failing during negotiation.
>
> >
> > liv3> show line0
> > ---------------------- line0 - T1 Inband DS0 ---------------
> >
> > Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
> >
> > Signaling: Trunk E&M wink start
> >
> > Receive Level: +2dB to -7.5dB
> >
> > Alarms Violations
> > ----------------------------- -----------------------------
> > Blue 0 Bipolar 0
> > Yellow 1 CRC Errors 0
> > Receive Carrier Loss 0 Multiframe Sync 0
> > Loss of Sync 0
> >
> > Let me know if their is anything I need cause my knowlegde here is very
> > limited. Thanks a bunch.
> >
>
> ----
> Josh Richards - <jrichard@livingston.com>
> Beta Engineer
> Lucent Technologies (Remote Access Business Unit)
> (previously Livingston Enterprises, Inc.)
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.