(PM) PM3 ROUTING Problem (fwd)

MegaZone (megazone@livingston.com)
Fri, 9 Jan 1998 22:19:11 -0800 (PST)

Once upon a time System Administrator shaped the electrons to say...
> I have a pm3 handling my ISDN customers .. One new customer has 128K
>Dedicated and wants 2 Class C's routed to his Box ( He has his choice on
>what to use .. a Cisco 1604 OR a Kentrox SOHO). He dials in fine when
>using the IPShar or proxy (only getting 1 ip) , but when he dials in
>trying to assign his ether port on his ISDN router to one of the address
>I have routed to him, he looses routing all together . Is there something
>I should know about the PM3 when routing to a dialup port on it??

You should assign him a static IP, and that IP would be the ether addr
of the router he is dialing in with. And if the 2 class Cs are contiguous
then you can use a 'Framed-IP-Netmask = 255.255.254.0" in the RADIUS
entry to tell the PM to route both to him. If they aren't contiguous
you'd use a 'Framed-IP-Netmask = 255.255.255.0' for the first C and a
Framed-Route statement for the second route.

If you need multiple machines on the ether to know about it you should
look into OSPF. If it is simple then static routes might handle it.

-MZ

--
Lucent Remote Access Division - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.