> Hi,
>
> What is going wrong?
> Does the modem hang after the v8 tone, or does it stay in the handshake?
>
> You can try for starters to force a v42bis connection, probably at&f%c1\n4
> or at&f%c2.
> Or set the commatime at 1 second (ats8=1) anf put one comma at the end of
> the dialstring.
> And maybe as last resort force the modem one speed lower than it is capable,
> so if it's a 33k6 modem force the speed at 31k2, you can do that with
> atb<number> or with at+ms=11,1,31200,31200
>
> Hope you have some luck with it.
>
> Mischa
>
> > I have a customer who I can't seem to get connected. He said he has
> > been on the phone with Zoom technicians and still can't connect to the PM3s.
> > He has an internal Zoom 2819 ATI3 1.002K56.DLPAZ201 I can get him connected
> > on analog USR courier v.everything modems on a PM2 at 26.4 or less but low
> > through-put.
As an update ... I just redid a computer for someone who has this modem...
It will dial in to our PM3 ComOS 3.7.2 PRI at 31200 with the default
setup...
I'm still working on our padding issues...
-- Aloha from Paradise,Sherwood
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.