Re: (PM) PM3 DSP ADMIN state (fwd)

MegaZone (megazone@livingston.com)
Thu, 8 Jan 1998 21:15:12 -0800 (PST)

Once upon a time Stephen Fisher shaped the electrons to say...
>Get them to build you a 3.7.2 with the AU code. It has major fixes over
>3.7.1c1 (though the main ADMIN problem was fixed by .1c1).

3.7.2 *HAS* the AU SPC code:
---cut---
Australian ISDN Support

The command "set isdn-switch ts014" is now available on the PortMaster
3 to support the TS014 ISDN PRI switch used in Australia.

Semipermanent connections (SPCs) are supported for switch type ts014
in Australia. To set up a SPC with switch-type ts014, set the port
type to network hardwired and set the directory number for the port to
the SPC ID, and then reset the port.
---cut---

-MZ

--
Lucent Remote Access Division - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.