Re: (PM) Connection Time takes 37 seconds

System Administrator (root@ns1.koyote.com)
Thu, 8 Jan 1998 12:34:34 -0600 (CST)

I found that enabling RIP on the Ether port makes connection much faster.
???? Who knows .. maybe a GURU can tell us why/

Daniel Henry
Koyote Internet

On Thu, 8 Jan 1998, Beth Montes wrote:

> At 12:21 PM 1/8/98 -0200, Marwan Helou wrote:
> >I have two types of access servers : Livingston PM2E and Cisco 2511.
> >Both Access servers authenticate using the same RADIUS server (2.0).
> >The authentication on the Cisco access server takes around 8 seconds
> >while on the portmaster takes 37 seconds.
> >Does Anybody have an explanation for this. and How to make the
> >authentication happen faster on the livingston?
>
> We use both of those access server platforms, and see no
> difference in authentication time using RADIUS 2.0.
>
> Could it be how you have them attached to your network?
> Maybe the Cisco is on a fast switch port, while the PM2e's
> are on a congested Ethernet segment?
>
> Beth
> _____________________________________________
>
> Beth Montes
> bmontes@iland.net 816-827-5111 x21
> ComputerLand of Sedalia http://www.c-land.com
> I-Land Internet Services http://www.iland.net
> _____________________________________________
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.