Re: (PM) PM3 for use in Australia IMPORTANT

Andrew Milner (andrew@vector.wantree.com.au)
Wed, 7 Jan 1998 13:23:04 +0800 (WST)

> be extremely careful .. if you have a Onramp Macrolink .. its still TS014, only
> Onramp Microlinks are etsi so far!
>
> So therefore .. for an Onramp Macrolink or normal macrolink use TS014
> for Microlinks on Onramp use net5
>
> Above refers to Australian service only on Telstra's network.

This is incorrect.

We have a total of 12 PM3's connected to a mix of Telstra and Optus PRI
services. The most recent Telstra PRIs are indeed ETSI compliant.

So, the real answer to the original question is.. if the PRI is a Telstra
Macrolink, the switch type should be set to ts014. If it's a Telstra
Onramp Macro, it should be set to net5.

Andrew

-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.