(PM) PM3 for use in Australia IMPORTANT

Anthony Green (ninja@hutch.com.au)
Wed, 7 Jan 1998 15:59:36 +1100 (EST)

>
> On Fri, Jan 02, 1998 at 03:04:01PM +0800, Richard Lennerts wrote:
>
>
> > Hi, I just received a PM3 which was apparently pre-configured for
> > Australian PRI standards. However the telco here says that the device is
> > "Autoblocking" all channels. The switch type was pre-configured for
> > att-5ess with crc4, hdb3 and a-law also set.
>
> Is it for use with a Telstra Macrolink, OnRamp or something totally
> different?
>
> If it is an ordinary Macrolink
> set isdn-switch TS014
>
> For OnRamp
> set isdn-switch net5
>
> These should set all the necessary PRI configs.

be extremely careful .. if you have a Onramp Macrolink .. its still TS014, only
Onramp Microlinks are etsi so far!

So therefore .. for an Onramp Macrolink or normal macrolink use TS014
for Microlinks on Onramp use net5

Above refers to Australian service only on Telstra's network.

regards,

>
> > Does anyone know what might be happening?
>
> Sounds like the isdn-switch type is misconfigured. That, or Telstra has
> their end stuffed up ;)
>
> One thought, you do have one or more modem cards to terminate voice (ie:
> modem) calls, don't you?
>
> Cheers,
>
> Paul Haddon
> Technical Services Manager
> Hartingdale Internet
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-users' in the body of the message.
>

-- 
ninja@hutch.com.au
Anthony Green

Hutchison Internet Level 1, 40 Pacific Highway Technical Sales Consultant St Leonards NSW 2065 Hutchison Telecommunications (Australia) Limited Phone: +61-2-99644888 Telecommunications from Hutchison Whampoa Limited Fax: +61-2-99644848

-----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/IT/O d? s: a-- C++$ ULSC++(++++)$ P+P L++++$>+++++ E+ W+$?>+++ N++$ !o K--? w--- O M+$ !V PS PE Y+ PGP !t !5 X++ !R tv b DI D+++ G+ e>++ h r y? ------END GEEK CODE BLOCK------ - To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-users' in the body of the message.