Re: (PM) Automatic outbound telnet (fwd)

Wim Bonis (bonis@kiss.de)
Sat, 3 Jan 1998 13:18:17 +0100 (MET)

> You'll need two entries. To do the auto-detect like mgetty:
>
> user Auth-Type = Local, Password = "password", Framed-Protocol = PPP
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Address = 255.255.255.254,
> Framed-IP-Netmask = 255.255.255.255,
> Framed-Routing = None,
> Framed-Compression = Van-Jacobson-TCP-IP,
> Framed-MTU = 1500
>
> user Auth-Type = Local, Password = "password"
> Service-Type = Login-User,
> Login-Service = Telnet,
> Login-IP-Host = 208.131.233.11
>
> The first entry will match the user when there is a 'hint' of PPP sent.
> NASes can do this when they see PPP started by the user, they know the
> user is trying PPP so they can included a 'Framed-Protocol' value in
> the Auth-Request to 'hint' to RADIUS what is wanted.
>

I also tried this on our setup. But if i put two times the same Entry,
builddbm says:

./builddbm: could not store lausen from line 6478, check for duplicate

Is it possible to fix the DBM code so that it works?

--
-------------------------------------------------------------------
Wim Bonis               ,+'^'+,                Telefon:0631-31662-0
                KISS GmbH = DPN POP KL         Technik:0631-31662-15
email: bonis@kiss.de    +,.,+                   privat:0631-36071-80
Koenigstrasse 23                                67655 Kaiserslautern




-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.