> PM-3 is connected to Telco via a Channelised T1 and uses BSDi based
> RADIUS to authenticate the calls, it accepts all the analog calls just
> fine.
Okay.
> I am trying to connect a Ascend/Pipeline50, with an intention to get a
> 56k x2(B-Channels) +more(with compression).
Two 56k DOSBS (DOV - data over voice) channels with STAC compression,
right?
> My user file on radius has an entry for a static IP address for my name.
> I checked with analog call and I do get static address when I dial in. I
> have used this address for Ascend, I have configured the Ascend properly
> so, I have a user name and password etc.. But it will not connect.
>
> Interesting enoug, when I run debug on PM-3, I see nothing.. I tested my
> ISDN Circuit-it has no problem.
Make sure you are using data-over-voice (dov/dosbs) 56k ISDN calls into
your CT1 and not data 56k ISDN.
- Steve
- Systems Manager
- Community Internet Access, Inc.
- Gallup and Grants, New Mexico
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.