> I FIXED MY PROBLEMS. No more connection problems.
<snip>
> Many of the customers in my area could not connect at K56 speeds. I was
> informed that my Telco had "bad" switches and it wouldn't work because of
> the Telco. I found the problem and fixed it. Now these customers are
> enjoying the K56 speed.
>
> Some customers were "sharing" their login and password with others.
> Livingston had no way of stopping this from happening. I found the problem
> and fixed it.
>
> The PM3's would randomly "reboot" themselves with no apparent cause. I
> found the problem and fixed it.
>
> Modems would go into "Admin" state and the machines had to be rebooted to
> fix it. I found the problem and fixed it.
>
> Customers were complaining that their connections would seem to slow down
> to a crawl and then speed back up again. I found the problem and fixed it.
>
> Customers were complaining that since I put in the new modems they had to
> "play" with Init strings to get a connection and stay connected. I found
> the problem and fixed it.
<snip>
> If you have had any of the above problems and would like to know what to do
> to FIX THE PROBLEM then email to me at bbloise@trellis.net and I will send
> you a detailed message on what I did to fix the problem.
>
> It takes a little hack, but it is well worth it. You only have to issue
> two commands to correct all the above problems. Email to me if you want
> the commands that I used to fix the problems.
Why don't you just make one post to the list so everyone can
benefit?
mike...
Micro$oft, what do you want to spend today?
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.