> >Hrm, we "had" about 120 sportsters connected to PM 2's with NO probs. I
> >BET you might have a modem/port speed mismatch. Try "attaching" to a port,
> >then type at&f? (was it 1 or 2 for hardware flow? somebody remember me).
> >I want to say at&f2&d3&c1s0=1&w.
>
> Sportster: &F1 = Hardware flow control template
> &D3 = Resets on receipt of DTR
Not any sportster I've seen.
&Dn n=0 Ignore DTR
n=1 On-Line Command Mode
n=2 DTE Controls DTR
S13 Bit Mapped
1 = Reset On DTR Loss
2 = Reduced Non-ARQ TX Buffer
4 = Set DEL=Backspace
8 = Do DS0 On DTR
16 = Do DS0 On Reset
32 = Reserved
64 = Disable Quick Retrains
128 = Escape Code Hang Up
so I use &D2S13=1
------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/message.
Florida Digital Turnpike |
______http://inorganic5.fdt.net/~jlewis/pgp for PGP public key____
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-users' in the body of the message.