Status: UP Framing: D4 Encoding: AMI PCM: u-law
Signaling: Trunk E&M wink start
Receive Level: +2dB to -7.5dB
Alarms Violations
----------------------------- -----------------------------
Blue 0 Bipolar 21
Yellow 0 CRC Errors 0
Receive Carrier Loss 0 Multiframe Sync 0
Loss of Sync 0
cdale-pm1>
I've had CT1's through 4 different Telco's and they've all been D4 AMI.
************************************************
*Shawn Morris smorris@noc.midwest.net*
*Midwest Internet smorris@midwest.net*
*Network Operations 800.651.1599x217*
*300 E. Main 618.529-7271x217*
*Carbondale, IL 62901 http://www.midwest.net*
************************************************
On Mon, 25 Aug 1997, Stephen Fisher wrote:
>
> On Mon, 25 Aug 1997, Mike Horwath wrote:
>
> > > > A PM3, with 3 10 modem cards. ComOS version 3.5.1b20. The lines
> > > > are FSX loop start (ESF, B8ZS). I'd prefer to have wink start
> > > ^^^^^^^^^
> > > Are you _sure_ of this? Try D4 framing, AMI coding. ESF-B8ZS is common
> > > on data lines, exceedingly rare on channelized voice lines.
> >
> > Uhm, what are you smoking?
>
> It must be good because mine are B8ZS/ESF as well:
>
> line0:
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> line1:
> Status: UP Framing: ESF Encoding: B8ZS PCM: u-law
>
> D4/AMI is usually only used on line-side CT1's which come off of a channel
> bank.
>
>
> - Steve
> - Systems Manager
> - Community Internet Access, Inc.
> - Gallup and Grants, New Mexico
>
>