Re: ospf not advertising

W Christopher Martin (wcm@onramp.ca)
Fri, 22 Aug 1997 02:02:12 -0400 (EDT)

mike cullerton writes:
> i'm not sure what to think now :( i have done the following.
...
> add area 30
> set ospf area 30 range 204.71.56.0/24

This probably isn't your problem, but I recall in some OSPF
documentation somewhere that starting with area 0 was recommended.
This is due to the fact that you must have an area 0 (backbone)
if you ever define more than one area.

Chris Martin
Onramp Network Services Inc.