I asked this same question a while back. Some commands can get the
operator into trouble if set on all ports, such as
set all device /dev/ttyrf
Since each port would need a unique device. Other commands do not make
sense with 'all' <<Mind fade>> I'm unable to think of a good example right
now.
However, if a command has application for use with 'all',
and by using 'all' the user isn't doing something bad,
and it would help the operator
then a RFE for that command to work with 'all' should be made.
> - Steve
> - Systems Manager
> - Community Internet Access, Inc.
> - Gallup and Grants, New Mexico
>
>On Thu, 21 Aug 1997, John Storms wrote:
>
>> In ComOS 3.7 compression has to be configured on a port by port basis. The
>> 'all' parameter cannot be used.
>>
>> At 05:00 PM 8/19/97 -0700, Phil Thomas wrote:
>> >Hey all,
>> >
>> > According to ComOs3.7 release you need to type the command "set Sx
>> >compress on" and this will turn on VJ and STAC compression. Is there a
>> >way to set all of the ports to on or do you just have to go thorough
>> >every Sx interface and set them. And has anyone actually got the
>> >compression to work with any ASCEND pipelines .
>> >
>> >Phil
>> >
>> >
>> >
>> ---
>> jstorms@livingston.com
>> Diplomacy: The art of saying good doggie
>> while seaching for a big rock.
>>
>
>
>
--- jstorms@livingston.com Diplomacy: The art of saying good doggie while seaching for a big rock.