Re: ospf not advertising

Wayne Bouchard (web@typo.org)
Thu, 21 Aug 1997 13:54:44 -0700 (MST)

> hello all,
>
> i'm trying to provide dedicated ip's to my customers using radius and
> ospf. when a customer connects to me, i want them to be able to have the
> same ip address no matter which terminal server they connect to.
>
> in my /etc/raddb/users file, i assign an ip address to a user. when
> they dial in, they get the correct address, and a "show route" in the
> portmaster shows the address in the routing table.
>
> but, the terminal server isn't advertising this route via ospf.
>
> my config for ospf includes
>
> set ospf enable
> add ospf area 30
> set ether0 ospf on
>
> i am confused about "set ospf area 30 range" command, and am wondering
> if this is my problem.

Thats your problem. the "range" means the interfaces whose addresses
are in the spoecified range will have OSFP hellos sent over them. If
you do a "show ip ospf neighbor" you'll probably not see any.

----------------------------------------------------------------------
Wayne Bouchard GlobalCenter
web@primenet.com
Primenet Network Engineering Internet Solutions for
(602) 416-6422 800-373-2499 x6422 Growing Businesses
FAX: (602) 416-9422
http://www.primenet.com http://www.globalcenter.net
----------------------------------------------------------------------