> > Once upon a time David Davies shaped the electrons to say...
> > >Does an init string exist to get an X2 to connect to the new modems at
> any
> > >speed ?
> >
> > The normal USR string should work. It should be falling back to V.34
> > when it doesn't hear X2 tones.
> >
> No dice with the stock code. I only have 3-4 people with X2's and they all
> know the story about Flex. Problem is they could connect with the old
> cards, but no dice with the new ones. Nada, Nix, Nein....
I would suggest trying the following init string for the X2
modems:
AT&F1&K0&I0S32=32S15=128S27=64S32=34
although we are not using the PM3's (yet) we were seeing the same problem
until we started using this. Let us know if this helps so, thanks.
============================================================================
Larry A. Weidig Excel.Net, Inc. Phone: (920) 452-0455
lweidig@excel.net "Your excellent Internet provider" Fax: (920) 452-8118
http://www.excel.net/ Toll Free: (888) 489-9995
----------------------------------------------------------------------------