> >I am having a problem with our first PM3. There is probably
> a setting off somewhere.
>
> >We have Pac Bell PRI,
>
> >features: ESF , B8ZS , AT&T #5 ESS ,
>
> >(And from the Pac Bell guy's faxed notes " Need timing (clocking)
> from T-1 CKT - not from internal source".
>
> This is interesting. I think he is trying to say take the timing off the line, but it appears you have a different transmit clock source than what you are receiving from the line. What else is your PM3 hooked up to?
Nothing except a laptop on the console port to configure it.
I reset the line1 and "inband" on line1, that is not connected to
anything, and it came right up.
Progress. Got our T-1 card today at Fedex so the system is almost ready
to go up for test!
Jeff Northon
jeffo@sasquatch.com
>
> I suspect he is seeing slips on the line.
>
> Kyle Platts
> CSS-Tech
> !NTERPRISE Networking Services