Re: 56KFlex upgrade failure

David Davies (David@buckeyeweb.com)
Fri, 15 Aug 1997 15:03:20 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Portmaster : "Re: QUAKE/UDP/PM3"
Previous message: Gary: "Re: Congrats! - WHOOPS!"
Maybe in reply to: Roy: "56KFlex upgrade failure"
Next in thread: David Davies: "Re: 56KFlex upgrade failure"

>
>
> Tooks a working PM-3 and did the following:
>
> 1) Upgraded to COMOS 3.7 and rebooted
> 2) Ran tests and left it on line for several hours. No problems
> 3) Powered off and swapped the modem cards to K56FLEX.
> 4) Powered up.
> 5) ISDN works fine. Analog calls are answered by dead silence.
> 6) SHOW MODEM shows everything working fine.
>
> Waiting for my call back from Livingston support :-(

Been there done that. New unit should be here Monday.

They told me it was a bad back plane card.

Try this... Take out the card at the top right and the top middle and
reboot (assuming your loaded to the gills)

Worked for us I was able to put the middle card back in while unit was on,
put the top right card in and it worked for about 12 hours before it locked
up. Currently running with 1 less 10X card with no probs.

Let me know

I also put 3 old cards in with the rest 56K and it came right up...

David Davies
Director, Internet Services
Buckeye Internet Services, Ltd.
http://www.buckeyeweb.com
"Through the modem, past the NAP, around the World, nothing but Net...."
-------EXPANSION ONLY--------BRING BERNIE BACK TO CLEVELAND--------

Next message: Portmaster : "Re: QUAKE/UDP/PM3"
Previous message: Gary: "Re: Congrats! - WHOOPS!"
Maybe in reply to: Roy: "56KFlex upgrade failure"
Next in thread: David Davies: "Re: 56KFlex upgrade failure"