>
> George:
>
> Just a note on YOUR problem... and hunting ISDN Bs in general... you MUST
> tell the telco that you require CSV=1 and CSD=1 on EACH BRI. By default it
> seems that the switches set them to be = 2. These are "Call Switched
> Voice" and "Data" and are the number of calls the switch will send to each
> B channel. With it set to 1, then the hunting will kick in. If it is set
> to 2, the call goes to the same B and the hunt group doesn't kick in.
Best way to GUARANTEE this is tell them that the BRI lines are for VOICE
not Data. Like you are connecting them to the new Legend 3 phone system.
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~