> I am wanting to know if i can connect a 2e30 with a 5bri card over isdn to
> another 2e30 with a 5 bri card, and combine 2 or more b channels to do
> multi-link ppp. Like have a pop at the end of an isdn line where the users
It would be better if you combined 2 or more with Multi Line Load
balancing as described in the LIvingston Config guide. You can balance
across ALL 15 ISDN lines!!! I know folks doing it.
> are authenticated and accounted and the link to the internet is done over
> the isdn to the portmaster that is on the ethernet segment with my gateway
> router.
>
> I think this has been addressed before but i am bringing it up again
> because the mail i got from livingston about the 3.6 com os seems to say
> multilink ppp is not supported on the pm2 in 3.6. I MAY BE WRONG ON THIS so
> sombody please set me straight.
Dont use multilink ppp, no need if you have 2 pm's.
>
> Can you reply to me directly? I am not on the list anymore.
>
> Thanks in advance
>
> Sammy@cheta.net
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~