>Upgraded to ComOS 3.7 today on a PM-2e w/ 5-BRI cards. Some of my ISDN
>connections stopped working. Upon investigation, those lines had no DN
>entered in their profile. I was instructed to do this as a work around
>to a previous bug that didn't allow 128K calls when an Ascend was dialing
>the same number for both calls (the second would reject). Now it will
>accept both calls, with the proper DNs entered, but nowhere did it say I
>must enter the previously omitted DNs.
I had this problem as well. I've never had DN's entered, and once I
reverted back to 3.5 from 3.7, everything worked fine. I am not real sure
why you have to have the DN's in there since in 3.5 you did not require
them. Once I was told from Livingston Tech support to add the DN's in, it
worked great with 3.7. Oh well, they may want to either fix that or add it
to the release notes (not that everyone reads them).
Dave...
Dave Berzins (berzins@nucleus.com)
President, Nucleus Information Service Inc.
1835B 10 Avenue S.W., Calgary, Alberta, Canada, T3C 0K2
Phone: (403)209-0000 Fax: (403)541-9474 Modem: (403)541-9400
www: http://www.nucleus.com
Nucleus is ... Everything Internet!