> Okay, well I found a tech note on Livingston's web site that said how to
> setup a "reverse terminal server", but it doesn't seem to work. I did
> the following:
>
> set c0 service_device telnet 6001
> set c0 device dialout
> set c0 modem on
> set c0 rts on
> set c0 xon off
> save c0
> reset c0
I use pmconsole and I make sure that the login service is Network/twoway,
then make sure security is on.
Disconnect the cable, attach to the port, THEN reconnect it and see if it
works.
>
> and I could not connect to it. I thought this would let me telnet to
> port 6001 on the PM3 and talk to what was plugged into it, but the PM3
> refused connections. I also tried to attach to the port, but that
> didn't work either. The port is always in the USERNAME state (which is
> why I can't attach to it I guess). Here is how it looks:
>
> ----------------------- Current Status - Port C0 ---------------------------
> Status: USERNAME
> Input: 1398 Parity Errors: 0
> Output: 1619 Framing Errors: 1
> Pending: 0 Overrun Errors: 0
> Modem Status: DCD- CTS+
>
> Active Configuration Default Configuration (* = Host
> -------------------- --------------------- Can Override)
> Port Type: Login Device
> Login Service: PortMaster PortMaster
> Baud Rates: 9600 9600,2400,1200
> Databits: 8 8
> Stopbits: 1 1
> Parity: none none
> Flow Control: RTS/CTS RTS/CTS
> Modem Control: off on
> Hosts: default
>
> Host Device: Network
> Terminal Type:
> Login Prompt: $hostname login:
>
> Even when I change the configuration and reset the port, the active
> configuration never changes.
>
> Another thing I noticed is that if I try to change DTR Idle, I get the
> following:
>
> Command> set c0 dtr_idle off
> Error: DTR Idle setting must be on or off
>
> All of this is with ComOS 3.7 on a PM3.
> --
> Chris Adams - cadams@ro.com
> System Administrator - Renaissance Internet Services
> I don't speak for anybody but myself - that's enough trouble.
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~