Re: Setting Baud Rate

Jake Messinger (jake@ams.com)
Mon, 11 Aug 1997 22:58:26 -0500 (CDT)

On Mon, 11 Aug 1997, Gail A. Harless wrote:

> Well, it's me, Gail. I figured this out (check the manual, dummy) and
> have speeds 1, 2, and 3 set to 57600. No help. Changed modem type from
> USR to usr-v34. No help.
>
> I attach okay - it says "connected". I type "at"; at that point the
> cursor is flashing to the right of the "t". I press enter. Now the
> cursor is flashing ON the "a" - it has returned to the beginning of the
> line. And nothing happens.

TYPE AT&f

>
> These modems were working fine. Sometimes I hate my job!
>
> Gail
>
> On Mon, 11 Aug 1997, Gail A. Harless wrote:
>
> > Hi!
> >
> > There has been a recent thread on setting baud rates. I have USR
> > Sportsters (33.6's) and a PM2e-30. The modems refuse to respond. I do an
> > attach, it says I'm connected to the port, then I type "at" and press
> > ENTER. Nothing happens.
> >
> > I'm thinking it may be the speed. The speed is set to 115200. I'm
> > guessing it should be lower. Someone told me to disconnect the modems
> > from the Portmaster, connect them to a computer, and fiddle around with
> > the modem speed. But I am not at the office, monitor remotely, and find
> > it hard to believe I can't do this at the PM command line.
> >
> > Thanks in advance for your assistance!
> >
> > Gail
> >
> > ******************************************************************************
> > Land of Lakes Communications
> > Setting New Standards in Quality and Customer Service
> >
> >
> > http://www.LandofLakes.com
> > gailh@LandofLakes.com (612) 462-1617
> > ******************************************************************************
> >
> >
> >
>
> ******************************************************************************
> Land of Lakes Communications
> Setting New Standards in Quality and Customer Service
>
>
> http://www.LandofLakes.com
> gailh@LandofLakes.com (612) 462-1617
> ******************************************************************************
>
>

~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~