> Hi!
>
> There has been a recent thread on setting baud rates. I have USR
> Sportsters (33.6's) and a PM2e-30. The modems refuse to respond. I do an
> attach, it says I'm connected to the port, then I type "at" and press
> ENTER. Nothing happens.
Do an AT&F and see what happens.
> I'm thinking it may be the speed. The speed is set to 115200. I'm
> guessing it should be lower. Someone told me to disconnect the modems
> from the Portmaster, connect them to a computer, and fiddle around with
> the modem speed. But I am not at the office, monitor remotely, and find
> it hard to believe I can't do this at the PM command line.
No, just set the speed of the port to 115200 then attach then at&f. The
modem is probably set so that the echo is OFF. I THINK that they Pm
default sportster modem setup turns it off. At least it does for the
Cardinal.
> > Thanks in advance for your assistance!
>
> Gail
>
> ******************************************************************************
> Land of Lakes Communications
> Setting New Standards in Quality and Customer Service
>
>
> http://www.LandofLakes.com
> gailh@LandofLakes.com (612) 462-1617
> ******************************************************************************
>
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~