> Well, it's me, Gail. I figured this out (check the manual, dummy) and
> have speeds 1, 2, and 3 set to 57600. No help. Changed modem type from
> USR to usr-v34. No help.
>
> I attach okay - it says "connected". I type "at"; at that point the
> cursor is flashing to the right of the "t". I press enter. Now the
> cursor is flashing ON the "a" - it has returned to the beginning of the
> line. And nothing happens.
8) but you didn't explain you probably have ate0 (no echo) etc set so you
wouldn't see anything returned other than the cursor moving around..
> These modems were working fine. Sometimes I hate my job!
8) That's why I used to do the modems off-line connected to a laptop.
Tested each one individually, then connected to a phone line and verified
that the autoanswer came on. When on-line with the PM2x then called
directly to verify.
*sigh* it's a bear, though I only did a max of 30 at a time, but it sure
made for a lot for my peace of mind.
-- Aloha from Paradise,Sherwood