I attach okay - it says "connected". I type "at"; at that point the
cursor is flashing to the right of the "t". I press enter. Now the
cursor is flashing ON the "a" - it has returned to the beginning of the
line. And nothing happens.
These modems were working fine. Sometimes I hate my job!
Gail
On Mon, 11 Aug 1997, Gail A. Harless wrote:
> Hi!
>
> There has been a recent thread on setting baud rates. I have USR
> Sportsters (33.6's) and a PM2e-30. The modems refuse to respond. I do an
> attach, it says I'm connected to the port, then I type "at" and press
> ENTER. Nothing happens.
>
> I'm thinking it may be the speed. The speed is set to 115200. I'm
> guessing it should be lower. Someone told me to disconnect the modems
> from the Portmaster, connect them to a computer, and fiddle around with
> the modem speed. But I am not at the office, monitor remotely, and find
> it hard to believe I can't do this at the PM command line.
>
> Thanks in advance for your assistance!
>
> Gail
>
> ******************************************************************************
> Land of Lakes Communications
> Setting New Standards in Quality and Customer Service
>
>
> http://www.LandofLakes.com
> gailh@LandofLakes.com (612) 462-1617
> ******************************************************************************
>
>
>
******************************************************************************
Land of Lakes Communications
Setting New Standards in Quality and Customer Service
http://www.LandofLakes.com
gailh@LandofLakes.com (612) 462-1617
******************************************************************************