Can't demand dial on OR-U

Rob Blendermann (grobb@tsc.tdk.com)
26 Jul 1997 14:33:25 -0700

I am attempting to do on_demand dialing from an
OR-U on port s0. Manual dialing the location
works fine but with the location set to on_demand
nothing occurs. Does anyone have any clues?

Thanks, Rob

Command> sho loc gv-s0
Location: gv-s0 Type: On Demand
Destination: 192.168.241.211 Netmask: 255.255.255.0
Protocol: PPP Options: Routing, Compression, Multilink
Group: 1 Max Ports: 1
Idle Timeout: 2 minutes High Mark: 0 bytes
Mtu: 1500 Async Map: 00000000

Dial Script: Send Command Wait for Reply
------------------------------ ------------------------------
atdt***********\r CONNECT
\r ogin:
********\r ssword:
********\r PPP

Command> sho global
System Name:
Default Host: 0.0.0.0
Alternate Hosts:
IP Gateway: 192.168.241.211
Gateway Metric: 1
Default Route: Broadcast, Listen (On)
Name Service: DNS
Name Server: 192.168.241.193
Domain: gv.tsc.tdk.com

Command> sho s0
----------------------- Current Status - Port S0 ---------------------------
Status: ESTABLISHED
Input: 62082 Parity Errors: 0
Output: 49724 Framing Errors: 0
Pending: 0 Overrun Errors: 0
Modem Status: DCD+ CTS+

Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Netwrk (Dial In & Out)
Baud Rates: 115200 115200,115200,115200
Flow Control: RTS/CTS RTS/CTS
Modem Control: on on

Remote Host: 192.168.241.211
Netmask: 255.255.255.0 0.0.0.0
Interface: ptp3 (PPP,Routing,Compr (PPP,Routing,Compress)
Mtu: 1500 1500
Async Map: L:00000000 R:00000000 00000000
Dial Group: 1
Telnet Access Port: 23
Loghost: 0.0.0.0
Assigned Address: 0.0.0.0
RADIUS Server: 0.0.0.0
Alternate Server: 0.0.0.0
Accounting Server: 0.0.0.0
Alt. Acct. Server: 0.0.0.0
ISDN Switch Type: NI-1
Disabled Modules: SNMP

E-mail rob.blendermann@tsc.tdk.com
Phone 916 478 8204