>
> Oh BTW, what are you using, rather than the PM3 ? Ascend ?
I am. Mostly because of the following reasons:
1. It was out first.
2. It supported 336 (eventually)
3. It does compression with pipe 25's and 50's, one of the most popular
isdn routers out there.
4. I was used to Ascend equipment
Livingston is addressing all these issues and more. For example, they do
336 (sometimes), they will support compression (in about 5 days if I am
hearing correctly).
Here is why my next purchase for our own clients will be a 3:
1. Supports 57600
2. Cheaper
3. PMCONSOLE
4. Compression
5. Its not Ascend
Here is why I will STILL sell P25's, 50's, 75's:
1. Cheaper than OR-U
2. 2 b bonding
3. Compression
4. pots ports (on 25 and 75) at least 1 please!
5. Will work with pm 3's compression (I hope)
6. Wall mountable
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~