> My I recommend that the ORs ship with a straight-through cable and a plug
> for it that would make the straight cable into (what is currently) console
> cable.
No, Id rather that they ship with the cable that they come with. I am
usually setting up an OR-U at a remote site with my laptop.
>
> Krzysztof
>
> On Tue, 22 Jul 1997, MegaZone wrote:
>
> > Once upon a time David Davies shaped the electrons to say...
> > >OR-M being used on remote network to dial into a PM3.
> > >Primary modem, plus an external hanging off of S0 with the supplied cable.
> >
> > Actually the supplied cable is a terminal cable - a crossover. You need
> > a straight-through. And I do not recommend putting ANOTHER crossover on
> > the end to switch back as some people do. Not nice.
> >
> > A straight RJ-45 to RJ-45 cable, like an ether cable, and an RJ-45 to DB-25
> > plug on the end is good.
> >
> > >I can set both of these modems up to dial on demand, and to dial when the
> > >need arises with bandwidth usage correct ?
> >
> > Yes.
> >
> > >That's it pretty simple huh...?
> >
> > Pretty much.
> >
> > -MZ
> > --
> > Livingston Enterprises - Chair, Department of Interstitial Affairs
> > Phone: 800-458-9966 510-737-2100 FAX: 510-737-2110 megazone@livingston.com
> > For support requests: support@livingston.com <http://www.livingston.com/>
> > Snail mail: 4464 Willow Road, Pleasanton, CA 94588
> >
>
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Jake Messinger 713-772-6690 jake@ams.com
Advanced Medical Systems, Inc. jake@uh.edu
8300 Bissonnet #400
Houston, Texas 77074 http://www.ams.com/~jake
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~