Chuck Scott
On Tue, 1 Jul 1997, Alexsandro Correia wrote:
> Dear Sirs,
>
> I don't know if this is the correct list to post this message,
> but any
> help will be useful.
>
> I'm trying to configure an IRX 211 router but I'm facing some
> problems.
>
> I configured my ethernet 1 with a valid ip 200.240.16.130 and put my
> public
> server on this network segment.
>
> >From this server and from the IRX, I can access internet.
>
> On my other port, ethernet 0 my private network. I configured this port
> with ip 128.1.9.55 . I want to use this segment with 128.1.x.x ips.
>
> >From this segment of the network, I can ping ethernet 1, but i can't ping
> ips in the internet.
>
> I'm sending my IRX-211 configuration, I think it may help.
>
>
> ----------------------- Current Status - Port S1
> ------------------------
> Status: ESTABLISHED
> Input: 354209 Abort Errors: 0
> Output: 310727 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Netwrk Netwrk (Hardwired)
> Line Speed: Ext Clock Ext Clock
> Modem Control: on on
> Remote Host: 200.224.113.57 200.224.113.57
> Local Address: 200.224.113.58 200.224.113.58
> Netmask: 255.255.255.252 255.255.255.252
> Interface: ptp1 (PPP,Routing) (PPP,Routing)
> Mtu: 1500 0
>
> ____________________________________________________
>
> ether0 port
>
> Command> sh ether0
> Ethernet Status: IP - Enabled IPX - Disabled
>
> Interface Addr: 128.1.9.55
> Netmask: 255.255.255.0
> Broadcast Address: 128.1.9.255
>
> IPX Network: 00000000
> IPX Frame Type: ETHERNET_802.2
> Ethernet Address: 00:c0:05:00:2a:74
>
> Routing: Quiet (Off)
> Input Filter:
> Output Filter:
>
> ether1 port
>
> Command> sh ether1
> Ethernet Status: IP - Enabled IPX - Disabled
>
> Interface Addr: 200.240.16.130
> Netmask: 255.255.255.224
> Broadcast Address: 200.240.16.159
>
> IPX Network: 00000000
> IPX Frame Type: ETHERNET_802.2
> Ethernet Address: 00:c0:05:00:2a:74
>
> Routing: Quiet (Off)
> Input Filter:
> Output Filter:
>
> ROUTES :
>
> Command> sh routes
> Destination Gateway Flag Met Interface
> --------------------- -------------------- ---- --- ---------
> 0.0.0.0 200.224.113.57 NS 1 ptp1
> 200.224.113.57 200.224.113.57 HL 1 ptp1
> 34.255.34.255 200.224.113.57 HS 1 ptp1
> 200.240.16.128 200.240.16.130 NL 1 ether1
> 128.1.9.0 128.1.9.55 NL 1 ether0
>
>
>
> Thanx a lot
>
>
> Alexsandro Correia
>
>