I have an ISDN Office Router at home and a fully-loaded PM-2 ISDN at work.
I am finding it increasingly difficult to connect to the PM for unknown
reasons, and I'm hoping someone can help me figure this out.
First thing I've noticed: From 'show all'... Notice that the byte counts
are all ZERO and that the port speed somehow went to 56000 instead of
64000. When I try to force a connection, the S1 or S2 light goes on for a
second and then goes out immediately. The NT-1 light is solid on.
S1 56000 on Netwrk CONNECTING 0 0
0
S2 56000 on Netwrk CONNECTING 0 0
0
Now, doing an ATTACH S1 and manually dialing, check this out:
Connected - Escape character is '^]'.
ATDTxxxxxx
Dialing...
Call Terminated - Normal Clearing (16)
NO CARRIER
The Portmaster at work has 12 B-Channels open right now (of 30 total);
there's no reason the call shouldn't go through. Both my OR and the ISDN PM
are running ComOS 3.5.
Any suggestions would be GREATLY appreciated. I suspect that this is a
telco trunking problem, as I'm in USWest territory, but I'm curious to find
out if anyone else has this problem, especially in the metropolitan Seattle
area.
Thanks,
Jared
Jared Reimer
System Administrator
Sense Networking Seattle
http://www.oz.net
+1 206 989-6698