Re: PM2i Problem

Curt Eckhart (curt@genesis.shadetree.com)
Thu, 10 Apr 1997 21:19:26 -0400

>From: "Darrin R. Woods" <dwoods@netgazer.net>
>Date: Tue, 25 Mar 1997 10:53:13 -0600
>
>Ok, we're adding two new ISDN lines to our PM2i and are having problems
>with them. When someone calls the number for the first channel, the 2i
>picks up. But, if you dial the second channel, it just rings and rings and
>rings. Here is the "sho all" from one of the channels:
>
> Status: IDLE
> Input: 0 Abort Errors: 0
> Output: 0 CRC Errors: 0
> Pending: 0 Overrun Errors: 0
> TX Errors: 0 Frame Errors: 0
> Modem Status: DCD- CTS+ TELCO+ NT1+ Disconnect: Temporary Failure
>
> Active Configuration Default Configuration
> -------------------- ---------------------
> Port Type: Login/Netwrk Login/Netwrk (Dial In)
> Line Speed: 64000 64000
>
> Terminal Type:
> SPID: 97277315970101
> Directory No:
> Dial Group: 0
>

Shouldn't there be a directory number in there, too ?

>
>The other channels are setup exactly the same, just different spids
>obviously. SW Hell says its a problem in our equipment, that they have
>tested the lines in 64k and 128k and they are good.
>
>We have one line installed already and it works like a champ. The only
>difference that we know of between the lines is that the one that works is
>for digital calls only whereas the new lines that we've installed will
>handle digital or analog.
>
>What have we got configured wrong? Why can't customers dial-in on the
>second channel?
>
>As always, thanks in advance.
>
>
>Darrin R. Woods | "I'm so happy that I, can't stop crying."
>Director Operations |
>Netgazer Solutions, Inc. | work: http://www.netgazer.net
>Dallas, Texas 972.702.9119 | home: http://www.intosh.com
>
> My employer most whole-heartedly denies everything I say
>
>
>