Which is what you want of course!
>Is there any way to get the PM3 to not connect at anything lower than
>V.34? Ie: I want the server to only connect at
>V.34/33.6/X2/ISDN/whatever but not V.32/V.32bis/V.22bis.
Evan,
What you are asking about is similar to the +MS=x,x,x,x settings on many
modems. For example with a Supra I use:
+MS=11,1,9600,33600
The first value, 11 is for v.34 and the second value 1 allow it to fall back
to any protocol that falls within that speed range. The 9600 is the lowest
speed to support and the 33600 is the highest.
Looking at the chart below users can connect with v.34, v.FC, v.32, or v.32bis.
Say you set it to 16800 for the lowest, then only v.34 and v.FC would be
allowed and if change the 2nd value to 0, only v.34 is allowed.
Why in the hell would you want to allow only v.34?! I'd like to set the
lowest to 14400, but that would alienate at least 3 customers, but we could
give them a 14.4 modem.
Not sure but I remember that MZ didn't want v.FC support and I agree, but
whether they support this style configuration is for them to tell.
Does the PM3 modem card have any documentation?
<mod> Protocol Possible Carrier Rate(s) (bps)
verb / Num
+------+----+----------+---------------------------------------------+
| V21 | 0 | V.21 | 300 |
+------+----+----------+---------------------------------------------+
| V22 | 1 | V.22 | 1200 |
+------+----+----------+---------------------------------------------+
| V22B | 2 | V.22bis | 2400 or 1200 |
+------+----+----------+---------------------------------------------+
| V23C | 3 | V.23 | 1200 Transmit / 75 Receive (originate mode) |
| | | | 75 Transmit / 1200 Receive (answering mode) |
+------+----+----------+---------------------------------------------+
| V32 | 9 | V.32 | 9600 or 4800 |
+------+----+----------+---------------------------------------------+
| V32B | 10 | V.32bis | 14400, 12000, 9600, 7200, or 4800 |
+------+----+----------+---------------------------------------------+
| V34 | 11 | V.34 | 33600 31200 28800 26400 24000 21600 19200 |
| | | | 16800 14400 12000 9600 7200 4800 or 2400 |
+------+----+----------+---------------------------------------------+
| B103 | 64 | Bell 103 | 300 |
+------+----+----------+---------------------------------------------+
| B212 | 69 | Bell 212 | 1200 |
+------+----+----------+---------------------------------------------+
| RVFC | 74 | VFC | 28800 26400 24000 21600 19200 16800 or 14400|
+------+----+----------+---------------------------------------------+
------------
Jeff Mountin
sysop@mixcom.com
MIX Communications
Serving the Internet since 1990
Sure my business card says "Senior Network Administrator"
They still make me do just about anything.