I have an IRX-114 at location-a. I have an PM2ER at location-b and an
OR-HS at location-c.
The telco has installed a frame-relay connection with local loops to each
location. Two bi-directional pvc's were configured as follows:
location-a to location-b and location-b to location-c. Specifically note
that there is no pvc from location-a to location-c.
How do I configure each of the three devices such that location-c and
location-b can access the internet (via location-a). Additionally,
location-b and location-c should be able to address each other. It is also
my intention that location-c local ethernet be a subnet of location-b's
class-c local ethernet.
I am looking for the specific settings to make in each of the three
routers to accomplish the above.
Thanks for the assistance.
Bob
Robert H. Ross, "Bob" President,
rross@supernet.net Fourth Wave, Inc.
Southeast Regional Director PO Box 38023
Netware Users International, NA Tallahassee, Fl 32315
--------------------------------------------------------------------------
Administrator for supernet.net (904) 216-1618 - voice
Florida's on-ramp to the (904) 216-1623 - fax
Information SuperHighway. (904) 216-1576 - on-line
--------------------------------------------------------------------------