We're running a nubmer of remote PM2ERs through a frame relay network
which are identically (we believe) configured. On all but one of them, we
can dial-in and establish a telnet session to a host and successfully use sz
to transfer files. On one, however, the transfers always fail with a
time-out. Since we are using RADIUS for all remote sites and the user
configuration is the same, there are no differences in how the users
accounts are configured. All modems are the same (USR Sportster V.34 with
4/18/95 rom), and all ports are 115200 DTE, 8/N/1.
For good measure, I had the COMOS upgraded this morning to 3.1.4
(although the others are all 3.1.3). It still doesn't work. Does anyone
have any idea as to what might be the problem?
Ed Pechan
-----------------------------------------------------------------------
Edward H. Pechan voice 703-642-1120 x 126
CrossLink Internet Access fax 703-642-1258
5537-C Hempstead Way e-mail epechan@crosslink.net
Springfield, VA 22151 USA www www.crosslink.net