Re: How Many frame connections can a 2eR take? (fwd)

Greg Merrell (greg@netuser.com)
Sun, 15 Oct 1995 19:30:16 -0700 (PDT)

"Brian 'MegaZone' Bikowicz" <megazone@livingston.com> wrote:
>Once upon a time Baha Baydar shaped the electrons to say...
>>I seem to recall seeing that the W1 port on the 2eR can take 2 incoming
>>PVC's. Is this correct? Or can more than that b routed through?
>
>---cut---
>It will be in future documentation. The steps are:
>
>add location (name)
>set location (name) protocol frame
>set location (name) mtu 1500
>set location (name) routing (on,off,brodcast,listen)
>set location (name) address (IP address)
>set location (name) group (dial group #)
>set location (name) netmask (netmask)
>add dlci (name) (remote PVC/Telco) (IP address)
>
>Repeat the last step for each PVC you need to enter.

Brian,

Is this multiple subinterface support provided in the current IRX software as
well? If so, what is the minimum version of software to support it?

Thanks,

Greg

=========================My return addresses are==============================
Greg Merrell Internet: greg@msm.com
MSM Company Internet Services Voice: +1-408-253-0970
Cupertino, CA Fax: +1-408-253-0590
==============================================================================