PortMaster 3
General Specifications

LAN Protocols TCP/IP, IPX
Routing Protocols RIP, OSPF, BGP4
WAN Protocols PPP, SLIP, CSLIP, Frame Relay
Bandwidth Optimization Multilink PPP, Multichassis PPP, multi-line load balancing, BACP TCP/IP header compression, optional tac-based data compression (Stac LZS/MS-Stac), expansion connector (future application)
True Digital K56flex Modems 8 or 10 modems per card, six rear panel chassis slots
Modem Protocols V.90, K56flex, V.34 (33.6Kbps and 28.8Kbps), V.32bis (14.4Kbps), V.32 (9600 and 4800bps), V.22bis (2400bps), V.42 and MNP 2-4 (error control), V.42bis and MNP 5 (data compression)
Dial-Up Connections 64/56Kbps synchronous, 64/56Kbps asynchronous with V.110/V.120 rate adaption, and analog modem (with AT command emulation)
T1, E1, or PRI Interfaces Single or dual (T1, E1 or PRI), RJ48 four-wire
ISDN Switch Compatibility ATT5ESS, ATT4ESS, NI2, DMS100, NET5(ETSI), 1TR6, NTT, KDD, VN4, TS014
Supported Encoding AMI and B8ZS (T1), AMI and HDB3 (E1)
Supported Framing ESF and D4 (T1), CRC4, FAS (E1)
Channelized T1 Robbed-bit signaling; loop start, immediate start, and wink start protocols: Leased Line and Frame Relay*
Channelized E1 MFR2 Q.441, Q.442, line signaling Q.422, Leased Line and Frame Relay*
Administration Management PMVision (GUI) for: Local or network booting
UNIX® or Windows® 95/NT      BOOTP
Local console, Telnet, or dial-up command line interface      Ping and traceroute utilities
SNMP MIB II and Enterprise MIB Support      Flash upgradable
Real-time modem and CSU management
Network Security RADIUS      ChoiceNet client-server-based filtering technology
Local user/password database      Firewall filtering
Dial-up support for PAP or CHAP, calling line ID, called line ID, callback authentication
Ethernet Connection One (selectable) 10BaseT (twisted pair), 10Base2 (thin Ethernet), 10Base5 (thick Ethernet AUI)
Asynchronous Port One 115.2Kbps (can be used as console or as routing port)
Integrated CSU/DSU Included
Memory 4 MB (standard)      Expandable to 8, 16, or 32 MB (optional)
Flash 1 MB
Rack Mount Kit Included
Hardware Options T1 WAN card (occupier one rear panel slot)
Stac LZS/MS Stac Compression daughtercard
IPSec Hardware Encryption daughtercard
Length 11.2 inches (29.2 cm)
Width 16.8 inches (42.7 cm)
Height 3.5 inches (8.9 cm)
Power 100-240 VAC (autosensing), -48VDC (optional)
Power Dissipation 20 watts and 0.8 watts per modem
Environmental Temperature 41 degrees Farenheit to 113 degrees Farenheit, 5 degrees Celsius to 45 degrees Celsius      Humidity (noncondensing) 20% to 80%
Agency Approvals and Certifications UL® (UL1950), FCC (FCC part 15 and FCC part 68), CSAĈ (IC CS03), CB (IEC 950), CE (NET5/CTR4, CTR12, CTR13, EN 55022, CISPR22, EN50082-1, EN 60950), BAKOM, BAPT (1TR6), SARTA, TAS (TS ISDN2), JATE, ACA (TS014, TS016, TS001, AS 3260, AS/NZS 3548)

*When the PortMaster 3 is configured for both dial-up and Leased Line service using different switch sources, it is recommended that the optional T1 WAN card be installed.

For additional information about our PortMaster 3 access concentrator, please contact your Lucent Technologies Sales Representative or call our Customer Service Center at 1-888-737-5454. Visit our website at www.livingston.com.

This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to these products and services.
Copyright 1998 Lucent Technologies. All rights reserved.
Printed in U.S.A.