|
PortMaster 2i Specifications
| General |
- Flash memory
- Local or network booting via tftp
- SNMP (MIB2)
- Reverse Telnet
- Ping utility
- Traceroute utility
- IPX SAP filtering
- Multi-line load balancing
- Domain name service or network information service
- Single or multiprotocol support selectable on each port
- Novell keep-alive spoofing
- PPP auto detect
- Session idle timers
- Clear channel TCP
- BOOTP
|
---|
Supported Protocols |
TCP, IP, IPX, SPX, SAP, RIP, SLIP, CSLIP, ICMP,
UDP, ARP, telnet, rlogin, PPP (fully compliant: RFC 1331;
RFC 1332; RFC 1334; RFC 1618; backward compatible: RFC 1171;
RFC 1172), MP (RFC 1717), V.120
|
---|
Routing Support |
- Concurrent TCP/IP and Novell IPX routing
- On-demand dial-up routing
- Unnumbered WAN links for TCP/IP
- Static routes
- On-demand, continuous connection, and manual/scheduled dialing
- Auto detect dial-out authentication scripts
- Dynamic routing using RIP for IP and IPX
- RIP support on a per-interface basis
- Trusted router RIP filtering
- Support for IP host, subnet, and network routes
- Automatic packet queuing and redial
- Proxy ARP
|
---|
Security |
- Local username/password database
- Dialback
- PAP and CHAP authentication
- Inbound/outbound IP and IPX packet filters
- Central authentication via RADIUS protocol
- Per-user authorization filters (source address, destination address, protocol,
protocol service [Web, e-mail, ftp], status of connection)
- User accounting (audit trails)
- ChoiceNet centralized filtering technology
|
---|
Asynchronous Port Support |
- LAN-to-LAN dial-on-demand routing
- Concurrent TCP/IP and Novell IPX dial-in
- Standard dial-up phone lines (using V.32 bis and V.34 modems)
- ISDN (using terminal adapter)
- Local and remote console
- Dial backup of ISDN WAN ports
|
---|
ISDN Support |
- Standards: ITU-T Q.920, Q.921, Q.922, Q.930, Q.931, Q.932
- Certifications: NET3/ICTR3, JATE (pending approval)
- Switch compatibility: National ISDN-1 (NI-1), AT&T 5ESS custom,
Northern Telecom DMS-100 custom, Euro-ISDN (ETSI),
1tr6, German National ISDN, VN4, NTT INS-Net64 (pending approval),
KDD (pending approval)
- Compatible with CSD/CSV services
- V.120 ISDN-to-DTE terminal rate adaption
- AT command emulation for ISDN dial-out
- V.120/Synchronous PPP autodetect
- Digital dialtone diagnostics
- Multilink PPP with dynamic bandwidth extensions
|
---|
Hardware |
- One Ethernet port with three switch-selectable interfaces:
- Built-in 10BaseT transceiver (twisted pair)
- Built-in 10Base2 transceiver (thin Ethernet)
- AUI connector
- Five BRI ports
- Per BRI port: S/T interface or U interface (with integrated
NT1), two 64 Kbps B-channels, one 16-Kbps
D-channel
- U interface only: One 10-pin RJ-45 high-density (HD)
connector for single-cable connection to punchdown
block per 5 BRI ports (10-foot cable included)
- One asynchronous serial port
- Up to 115.2 Kbps
- RS-423/232 interface
- DB-25 connector
- DTR, DSR, DCD, RTS, CTS, TxD, RxD
- Dimensions
- Length: 11.5 in (29.2 cm)
- Width: 16.8 in (42.7 cm)
- Height: 6.5 in (16.5 cm)
- Weight: 18.9 lb (8.6 kg)
- Power Requirements
- 110 VAC +/- 10%, 47-63 Hz
- 240 VAC +/- 10%, 47-63 Hz
- Environmental Operating Range
- Temperature: 41F to 113F, 5C to 45C
- Humidity: 20% to 80%
- Agency Approvals
|
---|
|